Electrical Mill Roll Stand 1800mm 3 Layer Corrugated Cardboard Production Line
Buyer supply apart:
Air compressor,air pipe line and e pipeline
1. Main power, electric wire from operate box to main power
2. Water supply, pipeline and barrel
3. Water, electric and gas, main ground foundation
4. Test machine use Raw materials ( paper roll, corn starch, caustic soda, sodium borax) to test
machinery
5. Machine use oil, lubricate oil,high temperature cream and lubricate oil
6. Installing engineer's food, hotel,commission and supply enough workers to help installing and test
machine.
7. Boiler 2T supply by customer and the pressure 1.25Mpa and the working pressure is 0.8~1.1Mpa.
Machine intruction:
| No. |
Name
|
Qty |
Feature
|
|
| 1 |
RS Electrical Mill Roll Stand
( with trolley and track)
|
3 |
-Toothed chuck,manual discbrakes,pneumatic mechanically actuated lift,panning left and right on the middle
--Guide rail length is 4500 mm, the trolley adopt 10 mm plate welding
|
|
| 2 |
PH-60 Pre-heater
|
2 |
-The roller φ600 mm,Electric adjustment angle,adjusting heating area within the range of 360 °
|
|
| 3 |
SF-10A(280) Single Facer
|
1 |
-Corrugated rollerφ280mm, 48CrMo high quality alloy steel,plating chromed
--Independent gearbox,universal joint drive structure
--Cylinder control lifting
--Pneumatic control glue,circulating supply glue
|
|
| 4 |
OB Conveying Bridge
|
1 |
-The main beam is connected with the GB 200 channel steel,63 angle steel
--Independent frequency motor drive paper conveying
--Suction tension and electric correcting
|
|
| 5 |
Duplex Pre-heater
|
1 |
-The rollerφ600 mm,electric adjustment angle angle,adjusting heating area within the range of 360 °
|
|
| 6 |
GM-15 Glue Machine
|
1 |
-Glue roller φ269mm,carved 25 line pit type mesh
--With preheater device
--Independent frequency motor drive
--Circulating supply glue with PLC control
--Man-machine interface display
|
|
| 7 |
DF-40 Double Facer
|
1 |
-Main frame is 360 mm GB channel steel
--Hot plate 600 mm 9 pics with plating chrome;
--4 M cooling section
--Adopt pressure bar lifting by pneumatic control
--The upper belt correct automatically
--Frequency motor drive
|
|
| 8 |
SS-E Electric Blade Machine
|
1 |
-Blade adopt tungsten alloy steel
--Electric adjusting and correcting --Automatically grinding
--5 blade 8 line
|
|
| 9 |
NC-12 Cut-Off
|
1 |
--Full AC servo control
--Energy storage type braking
--Straight knife structure
--Oil-immersed gear transmission
--10.4-inch touch screen display
|
|
| 10 |
LS Sheet Delivery Machine
|
1 |
--Electrical adjust the size of cardboard
--Cardboard transverse output controlled by pneumatic；
--Max stacking height 200mm
|
|
| 11 |
Glue Making System
|
1 |
--Customers supply the pipeline
--The glue making device includes: carrier tank,main body tank,storage tank,glue feeding pump and returning pump
|
|
| 12 |
Internal Steam System
|
1 |
--Steam system components adopt GB valve: Contains rotary joint,up and down distributor ,drain valve and pressure gauge, etc
--Boiler and pipeline supply by customer
|
|
PH-90 preheater:
This machine is used for heating liner (pre-heating for raw paper), and dry to control temperature and humidity
Electric to adjust the wrap angle, preheating area can be in 360° range
butterfly seal structure on two sides,saving the steam and improving heating efficiency
Soft siphon style structure,making the drainage more thoroughly
All the surfaces of rollers have been accurate ground and plating chromed
Supplying the heating energy for the heating equipment of the production line to keep the working temperature steady
Steam system:
1. Each unite separated supply steam ,sectional control temperature , energy saving and easy to adjust
2. Temperature controlled by adjusting the steam pressure with pressure gauge
3. Pipe system and rotary heating parts are flexible connected by metal soft pipe to extend the service life of the steam joint
4. All steam pipes are made of seamless steel pipe to ensure the safety under normal pressure
5. Each drain units is equipped with an empty bypass,the equipment cools down quickly when stop the machine
6. Inverted bucket trap, stainless steel check valve, stainless steel core cut-off valve
Your message must be between 20-3,000 characters!
